HOME PROFILE PRODUCTS CLIENTS CONTACT US ENQUIRY SITEMAP

Content on this page requires a newer version of Adobe Flash Player.

Get Adobe Flash player

 

Bacteriological Incubator - Manufacturers And Suppliers

 
Bacteriological Incubator - Manufacturers And Suppliers
 
 
Purpose : Designed, fabricated to suit Various applications Laboratory
Construction : Std. Model Inner S. Steel (SS 304) & Outer GI Powder coated.
GMP Model* Inner SS 316 & Outer Matt finish SS 304 gr. Double willed, outer body of S. Steel and / or Prime G. I. dully powder coated finish, inner made of S. Steel ( SS 304 or SS 316) grade. Outer metallic double walled dully-insulated door fitted with standard set of hardware. Having provision for adjustable mesh / perforated trays.
Insulation : Gap of inner & outer walled filled with sufficiently thick thermal insulation.
Heating : The heating elements are designed for low wattage density to works on black heat, are in coil form supported with refractory or long lasting S.S. tubular heater are mounted either on sidewalls or backside inner wall as per design & airflow pattern.
Air Circulation : Air draft by motorized air blower (dynamically balanced )blowing in the air at bottom and coming in working chamber from sides. No recalculation of air.
Temp. Control : Microprocessor based Controller cum Indicator with suitable sensor.
Tamp. Range : Ambient + 5°C to 60°C
Accuracy : ± 0.5° C or better
 
 
Inner Size (Inch) Watts Cap. / Ltrs SS  Wire Tray Perforated Trays Standard Complete SS
(b)  14 x 14 x 14 250 40          
(c) 18 x 18 x 18 500 90 2      
(d) 18 x 18 x 24 500 120 2      
(f) 24 x 24 x 24 750 220 3      
(g) 24 x 24 x 36 1000 325 3      
 
* OPTIONAL: -
a) Safety Blind Controller
b) P.I.D. Controller with Printer Interface
c) P.I.D. Controller with PC Interface.
d) PROTOCOL DOCUMENTS
 

Laboratory Testing Equipments

Bacteriological Incubator
Blood Bank Refrigerator
BOD Incubator
Clean Room Equipment
CO2 Incubator
Deep Freezer
Digital Moisture Meter
Environmental chamber
Fume Chamber
Humidity Oven
Laboratory Autoclave
Laboratory Oven
Laminar Flow Bench
Muffle Furnace 
Orbital Shaker Incubator
Rotary Shaker
Stability Chamber
Temperature Bath
UV Inspection Cabinet 
Vertical Dehumidifier
Viscometer Water Bath
Vacuum Oven
Walk In Chamber
 
Home - Profile - Products - Clients - Contact Us - Enquiry - Sitemap Designed & Hosted by : MID   Promoted by : GID
Our Clients    

Content on this page requires a newer version of Adobe Flash Player.

Get Adobe Flash player

 
Visit Also :
www.hmgind.com
www.stabilitytestchamber.net
www.laboratoryequipmentindia.com
www.stabilitychamber.net
www.clean-roomequipment.com
www.environmentaltestchamber.co.in
www.hmgindia.net
   
Factory Address : HMG HOUSE, Plot No. 33-A, Phase-IV, Parmar Techno Centre, Near Vasai Phata, Western Express Highway No.8, Vasai (East) Dist. Thane-401208, Maharashtra, India.
Phone No - +91 - 9819565718
 
Correspondence Address : F - 201, Country Park, Opp. Tata Steel Ltd., Dattapada Road, Borivli (East), Mumbai - 400 066, Maharashtra, India.
Mobile : 0 9867339190 / 0 9324637854